Use our intercooler core inventory system to compare dimensions and air flow requirements to find the correct Air/Air or Liquid/Air intercooler core for your application.
Bell Intercoolers offers a large selection of high quality, high performance, pressure tested intercooler cores in sizes to meet all of your turbo and supercharger performance requirements. Bell Intercoolers uses bar and plate type cores in Air to Air and Liquid to Air applications for the highest efficiencies and performance. When ordering an intercooler assembly from us, you will need to:
A) select your intercooler core
B) select the tank design.
With over 3,000 core sizes and configurations in stock, we probably have yours on hand and ready to go. Do we have what you’re looking for? Just take a look in our intercooler core inventory section.
If you have any questions concerning the selection of either of these components or questions about other options for your application please contact our Technical Support department and we will, at no cost, answer your intercooler design questions.
Select Core Thickness (Liquid/Air Core)
Compare air flow requirements and find the core that best meets the needs of your application. Cores are separated into categories based upon available core thickness. In each of thicknesses you will find a variety of core dimensions (height and tube length), with listings for air flow of each core, shown in cubic feet per minute (CFM, based on 1 psig pressure loss across the intercooler core and a charge-air pressure of 10 psig) and core weight.
Items listed in black are in stock and ready to ship. Items listed in red are currently out of stock and will take more than one day to ship. If it is out of stock, please get in touch with us.
Please note Air to Air and Liquid to Air intercooler cores may not be the same type of construction, bar and plate or extruded, and there may be dimensions that not available in both types. Also, if you should require a core size that is not listed please contact us for possible special order options.
Mid and Rear Engine Intercooling Solutions
The Liquid/Air intercooler system presents obvious advantages for mid and rear engine applications where space and airflow issues can often prevent the use of an effective Air/Air intercooler system. By allowing the heat extraction process to be essentially placed anywhere on the vehicle, you have the ability to go from struggling to find even marginal airflow, with a compromised intercooler size, to having the best intercooler size for your application, while removing the heat exchange component to the best available air stream, at the front of the vehicle.
Bell Intercoolers can help you with every aspect of designing your mid or rear engine intercooler system to allow you to extract the most performance from your application.
For drag racing, autocross or tractor/truck pull applications the Liquid/Air system can provide sizeable competitive advantages. Through the use of chilled coolant, you can reach intercooler efficiencies well in excess of 100%, unleashing dramatic performance gains. Contact Technical Support to explore the performance possibilities for your application.
Bell Intercoolers has extensive experience in designing Liquid/Air intercooler systems for everything from 400hp import drag cars to 5000+ tractor pulling applications. All Bell intercoolers Liquid/Air systems are pressure tested to your specifications to ensure the best possible reliability and performance.
Bell Intercoolers offers all of the major components for properly designed Liquid/Air intercooler system, including intercooler cores and assemblies, coolant pumps, reserviors, radiators/heat exchangers, and, of course, solid advice and information on designing the optimum system for your specific application.